Contact us for tailor-made advice or a quote.
sales@tulderhof.com +31 (0)40 400 63 13 Visit contact page

Benefits of Flash 3300 ventilation slide

Adjustable spoilers

High quality plastic

Ideal for wide barns

Perfectly insulated

Common models

Type Installation dimensions Net surface Capacity Pull force Stroke length
W H D 10 Pa 20 Pa 30 Pa
Flash 3300 580 mm 390 mm 60 mm 1570 cm2 2400 (m3/hr) 3300 (m3/hr) 4100 (m3/hr) 3,7 kg 420 mm
The openings listed above apply with the spoilers in a ‘normal’ position. The dimensions listed are examples. If you need a different size, please feel free to contact us. The Flash 3300 is made of plastic and has a standard installation size. All other Flash vents have a body made of formply and are available in any size.

Revolutionary evolution in the field of air control

The Flash 3300 side air inlet is made of high quality plastic as standard, very well insulated and fully removable.

With its completely flexible control, the Flash 3300 is the ideal side air inlet in situations where high demands are placed on air control. Consider for example barns that are wider than 20 meters. Barns containing obstacles. The Flash 3300 also directs the airflow around structural beams.

Spoilers

The Flash 3300 side air inlet has adjustable spoilers that allow you to direct the air into the barn in the direction you desire. You can also control the amount of air with a panel that slides vertically. Both the air direction and the amount of air can be adjusted independently.

Attention! The position of the spoilers has a major effect on the opening of the Flash 3300. The figure below illustrates this.

We recommend making the calculation for your barn at 10 Pa.

Spoilers normal Spoilers up Spoilers extreme
Opp. – 1570 cm2 Opp. 1480 cm2 Opp. 1150 cm2
10 Pa – 2400 m3/u 10 Pa – 2400 m3/u 10 Pa – 1750 m3/u
20 Pa – 3300 m3/u 20 Pa – 3300 m3/u 20 Pa – 2450 m3/u
30 Pa – 4100 m3/u 30 Pa – 4100 m3/u 30 Pa – 4100 m3/u

 

Side air inlet installation dimensions

The Flash 3300 has:

  • a fully insulated slide with 22 mm EPS
  • a spring-loaded option allowing for a 1 in 3 system
  • the possibility of a daylight version
  • a standard 40 mm flange around the entire body
  • the pulley is at a standard position in the flange for quick connection